Pinakin HPFC: Low Cost. Low Footprint. Firm Clean Power.
- Aarav Shah
- Jun 29
- 1 min read
For AI data centres and high-demand industrial sites, clean power is not just about availability. It is about delivering firm 24×7 output at the right cost, without demanding massive land or battery-heavy infrastructure.
Pinakin HPFC is built for this exact challenge. It delivers round-the-clock clean power at an estimated ₹4.0–₹4.6/kWh, while occupying less than 0.05 acre per firm MW. A 20 MW stack can fit in under an acre, compared to an estimated ~300–500 acres of solar-plus-storage required for the same firm output.
Unlike renewable-plus-battery models, Pinakin HPFC does not depend on large land deployment, battery cooling, replacement cycles, or complex storage infrastructure. It gives businesses a cleaner, compact, and scalable route to firm power, with water vapour as the emission output.

Firm 24×7 Clean-Power Comparison
Firm 24×7 Clean-Power Route | Effective ₹/kWh | Land / MW (Firm) | Battery | Emissions |
Solar + BESS | ~₹3.4–4.5 | ~20–25 acres | Required | Clean (op) |
RTC renewable (Solar+Wind+BESS) | ₹5.06–5.07 | ~15–25 acres | Required | Clean (op) |
FDRE (firm & dispatchable RE) | ₹4.4–4.9 | ~15–25 acres | Required | Clean (op) |
Grid (HT industrial) | ₹6.7–9.0 | Minimal (off-site) | n/a | Grid carbon |
Thermal genset | ₹18–25 | ~0.05–0.1 acre | No | Very high |
Pinakin HPFC | ₹4.0–4.6 | < 0.05 acre | Not needed | Water vapour |
Why Pinakin HPFC Stands Apart
₹4.0–₹4.6/kWh effective power costLess than 0.05 acre per firm MWNo battery requiredNo large land dependencyWater vapour emission outputDesigned for AI data centres, industrial parks, and high-load infrastructure
Pinakin HPFC brings renewable-PPA-level economics with a dramatically smaller footprint. It is the only firm clean-power route that is cheap on cost and cheap on land, making it ideal for businesses that need scalable, reliable, and space-efficient clean energy without the battery burden.



Comments